About this printer
Modularity for a Scalable Factory Solution
The DMP Factory 500 Solution is comprised of function-specific modules designed to maximize efficiency by optimizing utilization. Each module within the factory solution is fully integrated with a Removable Print Module (RPM) which is vacuum sealable for acontrolled print environment and engineered to move between printer and powder modules for a continuous production workflow.
Printer modules are designed for ongoing, 24/7 printing of parts. Powder Management Modules (PMMs) are designed to efficiently depowder parts on build platforms and automatically recycle unused powder materials to prepare the RPM for the next build.
Configure your factory set up with the optimum number and type of modules you need to meet your production workflow needs
Uniform, Repeatable Quality
When it comes to production, repeatable part quality is essential. The RPM of the DMP Factory 500 provides consistent powder control, batch after batch to deliver scalable metal additive manufacturing. Featuring a vacuum chamber to ensure the lowest O2content, the DMP Factory 500 printer module provides high quality 3D printed metal parts. Powder waste is eliminated, as the vacuum chamber guarantees consistent high material quality, sufficient to be used again and again.
Metal 3D Printing with Lower Part Costs
The modular design of DMP Factory 500 Solution enables continuous function of all metal 3D printing and powder management modules to maximize uptime, throughput and operational value. The ability to match the number and type of modules required for your production workflow helps optimize your investment while minimal manual processes further reduce ownership and operational costs.
With a large build volume (500 x 500 x 500mm) and high throughput enabled by multiple lasers, the DMP Factory 500 Solution delivers high productivity in metal additive manufacturing. Paired with its modular design, scaling production is straightforward through the installation of additional metal printer and powder modules.
Seamless Large Parts
The intelligent laser configuration and 3DXpert software driven scan technology of the DMP Factory 500 Solution enables the production of seamless large parts the size of the full build volume. This results in the highest surface quality for metal 3D printed parts with outstanding material properties.
- Modularity for a Scalable Factory Solution
- Uniform, Repeatable Quality
- Metal 3D Printing with Lower Part Costs
- High Productivity
- Seamless Large Parts
- Uses Direct Metal Printing (DMP) technology
- Build volume (W x D x H): 500 x 500 x 500 mm(20.7 x 20.7 x 20.7 in) –height inclusive of build plate
- Unique vacuum chamber concept (O2< 25ppm)
- Quick-swap removable print modules
- Fast bi-directional powder deposition